
Rackmount Mart Internal
Part # : PS1006
SPECIFICATION
Input:
AC input: 100 to 132 or 198 to 264VAC, user selectable 50 to 60Hz
Maximum inrush current: 50A for 110VAC cold start; 25A for 220VAC cold start
Output:
Voltage: +5 / +12 / -5 / -12 / 3.3VDC
Maximum load: 40 / 15 / 0.5 / 0.8 / 14A
Minimum load: 10 / 5 / 0.1 / 0.1 / 0.3A
-(output 1 + output: 200W)
Ripple: 80 / 120 / 80 / 120 / 50mV
Ripple/noise: 100 / 150 / 120 / 240 / 50mV
Line regulation: +/-1% / +/-1% / +/-1% / +/-1% / +/-1%
Load regulation: +/-5% / +/-5% / +/-10% / +/-10% / +/-5%
Cross regulation: +/-5% / +/-5% / +/-10% / +/-10% / +/-5%
Remote on / off control: +5V SB DC output 750mA (peak 1.2A)
When PS-on is pulled to TTL low, the DC output is to be enabled
When PS-off is pulled to TTL high, the DC output is to be disabled
Total output power: 550W continuous maximum
Efficiency: minimum 65% at full load
Hold-up time: 16ms at maximum load and normal input voltage
Power good: TTL. compatible signal out with 100ms to 500ms
Short circuit protection: all output equipped with short circuit protection
Overpower protection: peak power is protected between 130% and 160% of
continuous rated power
Dimensions: 140 x 150 x 86mm (W x L x H)
Environment conditions:
Operating temperature: 0 to 50 degrees Celsius
Cooling: by forced air
Storage temperature: -20 to 70 degree Celsius
Humidity: 5 to 90%, non-condensing
Reliability:
Mean time between failures: 50K hours at 25 degrees Celsius.
Safety/Quality Approval
Details:
UL CUL TUV CB NEMKO SEMKO DEMKO FIMKO
EN-55022 CISPER22 ClassB, CE Make, EN-61000-3-2 Harmonics, EN-61000-3-3, FCC
part15 ClassB
ISO9001