Description :
The LCD2U17-06 integrates a choice of 17" TFT display, keyboard, and pointing device for use in areas where space is a concern. The display does not require special proprietary cards or drivers as it connects directly to a standard VGA connector and automatically switches to the corresponding VGA mode. The unit withdraws from the rack on ball bearing slides which latch in the extended position. The display can then be folded up and the front panel folded down to allow access to the keyboard and mouse for use. When not in use, the display can be folded down which automatically shuts the display power off, and the unit pushed back into the rack and secured by pawl latches.
Specification
| Dimensions |
19.0" (W) x 3.5" (H) x 13.25" (D) (Rail Depth: 18") |
DISPLAY SPECIFICATIONS |
| Display Type |
17" TFT LCD. |
| Resolution |
1280 x 1024 |
| Brightness |
1000 cd/m2 typical |
| Contrast Ratio |
500:1 typical |
| Viewing Angle |
Horizontal: 178degrees
Vertical: 178 degrees |
| Input Signal |
Video: Analog RGB |
| Video Connector |
Signal: 15-pin mini D-sub, detachable |
| On-Screen Controls |
Brightness, Contrast, Position (Vert. & Horiz.), Frequency, Focus, Display Mode |
KEYBOARD SPECIFICATIONS |
| KB Connector |
PS/2 or USB |
| Keyboard |
88 Key keyboard with mouse holder |
| Options |
Lock , Retainer, S-Video & Composite Video |
Ordering information :
| Part # |
Description |
LCD2U17-06
|
2U Rack-mount 17" LCD Monitor Keyboard Drawer with 88 key keyboard & mouse holder & PS2 connector, black |
LCD2U17-06-m
|
2U Rack-mount 17" LCD Monitor Keyboard Drawer with 88 key keyboard & mouse holder, and mouse PS2 connector , black |
LCD2U17-06-u
|
2U Rack-mount 17" LCD Monitor Keyboard Drawer with 88 key keyboard & mouse holder & USB connector, black |
LCD2U17-06-u-m
|
2U Rack-mount 17" LCD Monitor Keyboard Drawer with 88 key keyboard & mouse holder, and mouse & USB connector , black |
| -R |
Add retainers |
| -L |
Add Lock |
| -C |
Add Lock and retainer |
| -AV |
Add S-Video &Composite Video inputs + ARGB & DVI inputs |
| -SBK |
Add 16” mounting rails |
|
