| CPU Support |
Supports Intel® LGA775 Core™ 2 Quad/Core™ 2 Duo/Celeron® processors
Intel® Embedded Processors List (Intel® Longevity CPU); Intel® Core™ 2 Quad Processor Q9400;
Intel® Core™ 2 Duo Processor E8400 & E7400 & E1500;
Intel® Celeron® 440 Processor 800/1066/1333 MHz System Bus |
| Main Memory |
2 x DIMM, support Dual channel SDRAM DDR3 memory up to 4GB,
FSB 1066/800MHz * Note: Maximum 4GB.
Actual memory size is dynamic based on the OS I/O resource allocation |
| Chipset |
Intel® G41 Graphics Memory Controller Hub (GMCH)
Intel® ICH7/ICH7R I/O Controller Hub |
| BIOS |
Award System BIOS Plug & Play Support 8M-bit flash ROM |
| On-board LAN |
2 x Intel® 82574L PCI Express Gigabit Ethernet LAN 2 x RJ45 with LED Supports Boot From LAN (PXE)
Supports Wake on LAN (When 5Vsb power available, LAN1 & LAN2) |
| Display |
Intel® G41 GMCH Integrated CRT: 1 x DB15 VGA connector |
| I/O Interface |
ŒŒ USB 2.0: 6 ports, through 1x6 JST
ŒŒ Serial port: 2 ports, with 2x5 box header (2.0mm),
supports RS232 only Parallel port: 1 port, with 2x13 box-header (2.0mm)
PS2: 1 x 6-pin JST connector (2.0mm) for KB/Mouse
Fan: 4-pin wafer for CPU; 3-pin wafer for System;
3-pin wafer for MCH 2-pin header for SMB;
2-pin header for reset;
2-pin header for power on switch 2-pin header for power LED;
2-pin header for HDD LED I/O on bracket;
1 x DB15 VGA connector;
2 x RJ45 GbE port; 1 x PS2; 1 x IDE with 40-pin header;
1 x Floppy with 34-pin header |
| Storage |
SATA: 4 ports |
| Watchdog Timer |
Watchdog timeout can be programmable by Software from 1 second to 255 seconds
Tolerance 15% under room temperature 25°C |
| On-board RTC |
On-chip RTC with battery backup 1 x External Li Battery
Torrance less than 2sec (24 hours) under 25°C |
| ISA Support |
Through PCI to ISA Interface (ITE 8888)
No ISA Master Devices but ISA DMA Devices
Maximize ISA Slot support up to 3 |
| System Monitor |
5 voltage (For +1.1V, +1.5V, +3.3V, +5V, +12V, Vcore)
3 Temperatures (CPU, two external Temperature Sensor)
2 FANs speed ( For CPU and System) |
| Power Input |
Power source from backplane through PCI/ISA Golden Finger
Supports both AT or ATX Power Supplies (Automatically, BIOS default: AT Mode)
When change to ATX, the BIOS default setting is as follow: POWER -SUPPLY TYPE--> [ATX]; AUTO PWR-FAILURE RESUME -->[ON]
+3.3V is Converted from +5V and not directly from Backplane or Power Supply
+5Vsb (Standby power) is connected from Backplane through 3pins Connectors
4 Pins +12V Power Input Connector |
| Dimensions |
338.58mm (L) x 122mm (W) (13.3" x 4.8") |
| Environment |
Board level operating temperature: 0°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: 10% to 90% (Non-condensing);
Non-operating 5% to 95%, non-condensing |
| Certifications |
CE approval
FCC Class A |
