| CPU Support |
Supports Intel® LGA775 Core 2 Duo / Pentium® 4 / Pentium® D / Celeron® D processors
Intel® Embedded Processors List (Intel® Longevity CPU),
Intel® Core™ 2 Duo Processor E6400 & E4300 & E2160,
Intel® Pentium® 4 Processor 651 & 551 & 531, Intel® Celeron® D Processor 352 & 341,
Intel® Celeron® Processor 440 533/800/1066 MHz System Bus |
| Main Memory |
2 x 240-pin DIMM, support Dual channel 533/667/800 MHz SDRAM DDR2 memory up to 4 GB. Note: Maximum 4 GB. Actual memory size is dynamic based on the OS I/O resource allocation |
| Chipset |
Intel® Q965 Graphics Memory Controller Hub (GMCH)
Intel® 82801HB (ICH8) I/O Controller Hub |
| BIOS |
Award System BIOS
Plug & Play support
8M-bit fl ash ROM |
| On-board LAN |
2 x Intel® 82573L PCI Express Gigabit Ethernet LAN
2 x RJ45 with LED
Supports Boot From LAN (PXE)
Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only)> |
| Display |
Intel® Q965 GMCH Integrated Intel® GMA 3000
Max 256 MB of DVMT for graphics memory
CRT:1 x DB15 VGA connector, Resolution up to 2048 x 1536 |
| I/O Interface |
USB 2.0: 6 ports, 2 ports through I/O bracket, 4 ports through 1x6 JST
Serial port: 2 ports, with 2x5 box header(2.0mm) , supports RS232 only
port: 1 port, with 2x13 box-header(2.0mm)
PS2: 1 x 6-pin JST connector(2.0mm) for KB/ Mouse
Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH
2-pin header for SMB; 2-pin header for reset; 2-pin headerfor power on switch
2-pin header for power LED; 2-pin header for HDD LED
-board buzzer / IrDA (share with COM2)
I/O on bracket:1 x DB15 VGA connector, 2 x RJ45 GbE port, 2 x USB2.0 |
| Storage |
SATA: 4 ports (without Raid function) |
| Watchdog Timer |
Watchdog timeout can be programmable by Software from 1 second to 255 seconds
Tolerance 15% under room temperature 25°C |
| On-board RTC |
On-chip RTC with battery backup
1 x External Li Battery
Torrance less than 2sec (24 hours) under 25˚C |
| ISA Support |
Through PCI to ISA Interface (ITE 8888)
No ISA Master Devices but ISA DMA Devices
Maximize ISA Slot support up to 3 |
| System Monitor |
4 voltage (For +3.3V, +5V, +12V, Vcore)
3 Temperatures (CPU, two external Temperature Sensor)
3 FANs speed (CPU, System and MCH FANs) |
| Power Input |
Power source from backplane through PCI/ISA Golden Finger
Supports both AT or ATX Power Supplies (Automatically, BIOS default :AT Mode)
When change to ATX, the BIOS default setting is as follow:POWER -SUPPLY TYPE--> [ATX], AUTO PWR-FAILURE RESUME -->[ON]
+3.3V is Converted from +5V and not directly from Backplane or Power Supply
+5Vsb (Standby power) is connected from Backplane through 3pins Connectors
4 Pins +12V Power Input Connector |
| Dimensions |
338.58 mm (L) x 122 mm (W) (13.3” x 4.8”) |
| Environment |
Board level operating temperature: 0°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: 10% to 90% (Non-condensing) Non-operating 5%~95%, non-condensing |
| Certifications |
CE approval
FCC Class A |
