| CPU Support |
Intel mPGA478 Pentium 4 CPU up to 2.4 GHz+ @ 533/400 MHz FSB Intel 0.13/0.18-micron Northwood / Willamette Pentium 4 CPU supported |
| Main Memory |
2 GB PC1600/2100 DDR SDRAM on 2 x 184-pin DIMM slots
|
| Chipset |
Intel Brookdale-G/GL chipset with 82845G/GL MGCH and 82801DB ICH4
RIC-977 with Intel 845GL supports 400 MHz FSB and CRT display only
RIC-977 with Intel 845G supports 533/400 MHz FSB and LVDS/TTL flat panel
|
| Form Factor |
Full-size PICMG-bus CPU Card / Slot PC PICMG version 1.0 (Rev. 2.0) and PCI version 2.0 compliant
|
| On-board LAN |
Integrated dual Intel PRO/100+ LAN interfaces, IEEE802.3U compliant 1st LAN with Intel ICH2 and 82562ET, 2nd LAN with Intel 82559ER External dual RJ45 connectors on brackett
|
| Display |
Intel 845G/GL MGCH built-in VGA controller with 3D/2D engine Optional dual 24-bit LVDS flat panel / digital video interface External DB15 female connector on bracket and internal 16-pin header Oboard dual 20-pin header connector for LVDS
|
| I/O Interface |
1 x RS-232 and 1 x RS-232/422/485 serial port
4 x USB ports with USB verison 2.0 compliant
1 x SPP/EPP/ECP parallel port
1 x IrDA port, 1 x FDD port
1 x external PS/2 keyboard / mouse and 1 x internal AT keyboard port
|
| Solid State Disk |
Onboard 32-pin DIP JEDEC DiskOnChip socket Flash memory capacity up to 576 MB with ECC/EDC data protection
|
| Watchdog Timer |
Generates NMI or system reset with 1 to 255 sec. / min. of time out value |
| Real Time Clock |
Intel ICH4 integrated RTC with onboard lithium battery
|
| ISA High Drive |
ISA 64mA high Drive capacity with TI 245 buffer on address and data bus
|
| PCI Enhanced IDE |
Dual UltraATA/100 bus master IDE channels up to 4 ATAPI devices IDE2 supports +5V Vcc for additional DiskOnModule (DOM) flash disk
|
| Environment |
Power Requirement: +5V, +12V, -12V (P4 additional +12V power free)
Board Dimension: 338 x 122 mm (L x W)
Operation Temperature: 0° ~ 60° C (32° ~ 140° F)
|
