| CPU Support |
Single socket LGA775
Supports Intel® Pentium 4 with 533/800 MHz FSB for speeds up to 3.8 GHz
Supports Hyper-Threading Technology
|
| Main Memory |
Four 240-pin DIMM sockets, up to 4 GB Dual channel non- ECC DDR2 400/533 MHz Note: 4GB is a maximum spec according to the chipset, but due to I/O address issues, the actual memory support size might not reach the 4 GB maximum |
| Chipset |
Intel® 915GV and ICH6 chipset
|
| BIOS |
Award System BIOS
Plug & Play support
Advanced Power Management and Advanced Configuration & Power Interface support
|
| On-board LAN |
Intel 82573L PCI Express Gigabit Ethernet LAN x 2 2-pin header for extended LAN LED |
| Display |
Chipset w/built-in integrated graphics device
Analog display supports up to 2048 x 1536 @ 85 Hz CRT
|
| I/O Interface |
10-pin box header x 2, supports RS232 only
USB 2.0 port x 6 via 6-pin JST connector x 3, bandwidth: 480 Mb/s
Ultra ATA 100/66/33, 40-pin connector x 1
SATA HDD: 4 Serial ATA Ports, bandwidth: 150 MB/s
Parallel port: 26-pin connector x 1
Mini-DIN PS/2 Keyboard/Mouse x 1
Floppy: 34-pin connector x 1
Digital I/O Port: 4 in, 4 out with TTL level interface
On-board buzzer x 1/4-pin for speaker/2-pin power- on button switch/ 2-pin header for SMBus 2.0
4-pin fan JST connector x 1 (For CPU); 3-pin fan connector x 2
5-pin connector x 1 for chassis or backplane front keyboard
I/O On Bracket
VGA DB-15 connector x 1
RJ45 Gigabit Ethernet LAN port x 2
4Mini-DIN for Keyboard/Mouse x 1
|
| Storage |
SATA: 4 ports (without Raid function) |
| Watchdog Timer |
1-minute increments from 1 to 255 minutes
1-second increments from 1 to 255 seconds
|
| On-board RTC |
On-chip RTC with battery backup
External Li battery x 1
|
| ISA Support |
Through PCI to ISA Interface
No ISA Master Device Support. / No Support for ISA DMA
Maximum of 3 ISA slots supported
|
| System Monitor |
System monitor controller from Super I/O
8 voltage (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
2 temperature (For CPU and system)
3 fan speed monitors (one for CPU and two for systems)
|
| Power Input |
Power source from backplane through PCI/ISA Golden Finger
Supports both AT or ATX Power Supplies (Automatically)
+3.3 V is converted from +5 V and not directly from backplane or power supply
+5 Vsb (Standby power) is connected from backplane via a 3-pin connector
4-pin +12 V Power Input Connector
|
| Power Requirements |
5 V : 20 A
12 V: 15 A
5 Vsb : 1.5 A
|
| Dimensions |
338.58 mm (L) x 122 mm (W) (13.3" L x 3.8" W)
|
| Environment |
Board level operating temperature: 0° to 60°
Storage temperature: -20° to 80°
Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications |
CE approval
FCC Class A
|
| Disk On Module |
2-pin power connector for DOM
|
